Instruction:
The rock drill is used for rock drill ,blasting holes and other drilling works in the quarries,small coal mines and other constructions.
It's suitable for drill of horizontal or inclined holes on the medium-hard and hard rock .When it's matched with air leg Model FT100,it can blast holes from different dorections and angles.
Blast hole diameter is between 36mm and 42mm.With an efficient depth from 1.5m to 2m
It's recommended to be matched with Model py-1.2/0.39 air compressor which is powered by Model RS1100 diesel engine .Other suitable air compressors can also be matched with this rock drill.
Specification:
Weight :18kg
Overall leength:550mm
Cylinder dia:58mm
Piston stroke:45mm
Air pipe inner dia:19mm
Water pipe inner dia :8mm
Shank dimensions :22¡Á108mm
Water pressure:3.9-5.9¡Á105Pa
Air pressure:¡Üat 3.9***
Air consumption(at 3.9¡Á105Pa):£¼1.2m3/min
Average speed(at 3.9¡Á105Pa):80mm(f£¼14 drill bit ?36)
I***ct energy(at 4.9¡Á105):24.5J
Torque(at 4.9¡Á105Pa)7.85N.M
Air consumption(at 4.9¡Á105Pa):¡Ü1.35m3/min
Average speed (at 4.9¡Á105Pa):120mm(f<14 drill bits ?36)
FY200oil lubricator
Weight:¡Ü1.2kg
Oil capacity:200mm
FT100air leg
Weight:11kg
Propulsion stroke:810mm
Cylinder dia:52mm
Length:1312mm
|
Home
